In short, gethome studio is the Mac app that sets up a gethome hub and then looks after it. It prepares an SD card that already has Raspberry Pi OS on it, or finds a Pi already running on your network; then it watches the install and claims the hub for you — no terminal, and no pairing code. Afterwards it shows what the iPhone app doesn’t: the broker’s live traffic, the device-schema library and every AI run with what it cost.
Set up a hub without a terminal, tune every hub you own from one window, and wire your own boards into it. Soon you’ll vibe-code the devices and integrations your space is missing.
Download for macOS — Version 1.1.2 · macOS 14 or later · 8 MB
One sentence says whether the hub is working normally or needs your attention, over what it can talk to — Zigbee, Matter, Wi-Fi and MQTT — each with the fix when it’s down.
Rename a device or move it to another room for every app in the home, and see how the hub came to understand it: from its own description, with generic controls, by AI, or from a file.
Open the network and watch what joins — over the hub’s own MQTT broker, live, where the button you just pressed shows up as a message.
The members, invite codes that name the role somebody joins as, and a permissions matrix where every cell is a click.
The home’s keys, the model each job runs on and everything the AI did, on one tab — with one sentence, never folded away, saying what leaves the house.
An SD card for a Pi that isn’t set up yet, or a Pi that’s already running on your network. Either way the Pi installs the hub itself, Studio watches, and you end up owning it.
The card carries the whole setup: put it in the Pi and the hub installs itself. About ten minutes, mostly unattended.
A card with Raspberry Pi OS on it — a blank one is fine, Studio shows you how to write it. Nothing is written until you pick the card and confirm.
Studio finds your Pi, signs in once, and the Pi installs the hub itself. About five minutes, mostly unattended — you can close Studio and come back.
SSH switched on and the account’s password, once — any Pi, or a Debian-like machine.
Setting hubs up and looking after them is where Studio starts. The next two tools already have their rows in its sidebar, marked Soon.
Describe a device — a mailbox sensor on an ESP32 that tells the hub when the lid opens — and Studio will write its firmware, flash it, and wire it into your hub through its MQTT convention.
Today you wire a board of your own in by hand: the broker has an account meant for exactly that.
Studio will connect wired controllers, relay boards and third-party bridges to your hub through its public MQTT convention — with a guided setup, and AI to help with the mapping.
Today integrators build against the convention directly.
In short, gethome studio is the Mac app that sets up a gethome hub and then looks after it. It prepares an SD card that already has Raspberry Pi OS on it, or finds a Pi already running on your network; then it watches the install and claims the hub for you — no terminal, and no pairing code. Afterwards it shows what the iPhone app doesn’t: the broker’s live traffic, the device-schema library and every AI run with what it cost.
No — but it’s the way we recommend. The hub also installs with one command, and the iPhone app claims it, updates it and edits who may do what. Studio does the install with no terminal and claims the hub for you, then adds the parts that want a big screen: the broker’s traffic, the schema library and the AI’s run log.
Studio runs on a Mac with macOS 14 or later — every Mac from 2018 on. The hub itself never runs on the Mac: Studio installs it on a 64-bit Raspberry Pi or, over SSH, on a Debian-like machine. A card with the 32-bit image is stopped before anything is written, with how to rewrite it.
No account at all: Studio joins the hub as this Mac, and the hub’s token is kept in the Keychain. The Pi’s password is asked for at most once, on the running-Pi path, and never stored — Studio keeps an SSH key of its own on the Pi, and you can use it too.
Yes. A hub on your network shows up under Found on your network with a Claim button. If Studio can sign in to its Pi, it settles the pairing code by itself; if not, you type the hub’s code once.
Download it from this page: it runs on macOS 14 or later, on Apple silicon or Intel. It isn’t on the Mac App Store, which couldn’t give it what it needs to sign in to your Pi and write its card — it is signed with our Apple Developer ID and notarized by Apple instead. Once a day it asks gethome.me for a newer version and shows you what’s new, and it installs one when you say so.
Download it for your Mac and set up a hub today. Then live with it in gethome for iPhone, free on the App Store.
Download for macOS · Download gethome for iPhone on the App Store